(Kopie 1)
Wo Forschung, KI und Praxis aufeinandertreffen
D. Trienens, F. Brüning, V. Schöppner, Kunststoffland NRW Report 03–2025 (2026).
Mechanisms of deposit formation in injection moulding cavities and the role of tool coatings and internal release agents
K. Lingnau, C. Theile-Rasche, K. Vissing, E. Moritzer, G. Grundmeier, M. Wiesing, Surface and Coatings Technology 524 (2026) 133280.
Der Einzug als Schlüssel zum Erfolg: Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten
J. Landgräber, V. Schöppner, F. Brüning, Kunststoffe (2026) 22–25.
Wo Forschung, KI und Praxis aufeinandertreffen
D. Trienens, F. Brüning, V. Schöppner, kunststoffland NRW report (2026) 24–25.
Verbesserung des Einzugsverhaltens im Spritzgießprozess - Numerik und Experiment
J. Landgräber, V. Schöppner, in: VDI Jahrestagung Spritzgießen (Ed.), 2026.
Fiber-matrix adhesion in glass fiber reinforced thermoplastic composite laminates and its effect on mechanical properties
E. Moritzer, P. Brandes, M. Wittler, L. Claes, M. Wippermann, M. Haag, T. Gries, B. Henning, International Polymer Processing (2026).
Determination of the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic waves
M. Wippermann, L. Claes, P. Brandes, E. Moritzer, B. Henning, in: 2025.
Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic Waves
L. Claes, H. Zeipert, P. Brandes, E. Moritzer, B. Henning, in: 2025.
Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
K. Gevers, Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden , Shaker Verlag, Düren, 2025.
ZERSTÖRUNGSFREIE ULTRASCHALLPRÜFUNG VON ORGANOBLECHEN
E. Moritzer, P. Brandes, M.S. Westphal, L. Claes, M. Wippermann, J. Düchting, B. Henning, WAK Jahresmagazin 2025 (2025) 26–29.
Validation of Possible Applications of Flake Laminates for Recycling of PA6-CF Production Scrap
J. Beckmann, A. Bachmann, P. Brandes, T. Marten, T. Tröster, E. Moritzer, in: 24th International Conference on Composite Materials (ICCM24), The University of Delaware, 2025.
Influence of pre-shearing on the rheological properties of filled rubber compounds
D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
Vorhersagemodell zum ortsaufgelösten Energieeintrag in dichtkämmenden Gleichdrall-Doppelschneckenextrudern
L. Austermeier, Vorhersagemodell Zum Ortsaufgelösten Energieeintrag in Dichtkämmenden Gleichdrall-Doppelschneckenextrudern, 2025.
Die verarbeitungsinduzierte Glasfaserschädigung von Bulk Molding Compounds
M. Scholle, Die Verarbeitungsinduzierte Glasfaserschädigung von Bulk Molding Compounds, 2025.
Creep Effects of Thermoplastic Flange Systems
F. Bartmann, A. Riedl, E. Moritzer, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2025.
Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften
E. Moritzer, D. Rauen, J. Hoppe, Magazin für Oberflächentechnik 2025 (2025).
A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES
E. Moritzer, P. Brandes, M. Wittler, M.S. Westphal, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.
Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren
E. Moritzer, P.L. Völklein, in: Technomer 2025 29. Fachtagung, 2025.
Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen
T. Arndt, V. Schöppner, Joining Plastics 19 (2025) 166–174.
Berücksichtigung des Kriechverhaltens bei numerischen Simulationen von Thermoplastflanschverbindungen
E. Moritzer, F. Bartmann, A. Riedl, 1. XXIV Dichtungskolloquium (Essen Juni 2025) (2025).
PROCESS DEVELOPMENT OF A POWDER-BASED DIRECT COATING IN THE INJECTION MOLDING PROCESS
E. Moritzer, K. Lingnau, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.
Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS)
J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing 41 (2025) 1–14.
Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess
F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25.
Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess
F. Löhr, in: AZuR-Kolloquium 2025, 2025.
Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process
F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.
Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations
F. Knaup, V. Schöppner, International Polymer Processing (2025).
Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length
F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.
Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder
F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.
Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress
D. Kleinschmidt, V. Schöppner, in: S. Gummitekniska Förening (Ed.), RubberCon 2025, 2025.
Findings on pinless screw design for rubber extrusion
L. Schmidt, V. Schöppner, F. Brüning, in: S. Gummitekniska Förening, N. and F. rubber associations Swedish (Eds.), RubberCon 2025, 2025.
Investigation of alternative pinless screw concepts for rubber extrusion
L. Schmidt, F. Brüning, KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang (2025) 34–40.
Consideration of modeled pressure dependent viscosity data in injection molding simulation
F.P. Hanselle, V. Schöppner, F. Brüning, International Polymer Processing (2025).
Influence of pre-shearing on the rheological properties of filled rubber compounds
D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden
D. Kleinschmidt, in: Extrusion - Grundlagen und Praxis, Hannover, 2025.
Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen
J.D.R.H. Petzke, in: AZuR-Kolloquium 2025, 2025.
Improvement of injection molding simulations by application of modeled pressure dependent viscosity data
F.P. Hanselle, in: 2025.
NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD
E. Moritzer, F. Bartmann, A. Riedl, in: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, 2025.
Einfluss von FFF-Prozessparametern auf die elektrische Leitfähigkeit von leitfähigen TPE-Komposite
M.K.F. Salm, E. Moritzer, in: Technomer 2025 29. Fachtagung, 2025.
Einfluss der Schichtstruktur auf die Druckfestigkeit von FDM-Bauteilen – Ein konzeptioneller Ansatz
J. Beutelspacher, D. Scharwald, E. Moritzer, in: Technomer 2025 29. Fachtagung, 2025.
Transfer of powder-based direct coating in the injection molding process from two dimensional components to three-dimensional components
E. Moritzer, K.M. Lingnau, in: The 40th International Conference of Polymer Processing Society, 2025.
Werkstofflicher Ansatz zum adhäsiv-basierten Fügen für hochflexible TPE-Organobleche als Verstärkungsstruktur
C. Held, E. Moritzer, in: FA11 – Kunststoff-Fügen, 2025.
Influence of the processing parameters on the mechanical strenght of injection moulded BMC components for direct screwing
C. Held, E. Moritzer, in: The 40th International Conference of Polymer Processing Society, 2025.
Investigations into the specific throughput stability of conical feed zones over the rotation speed during the direct processing of polypropylene regrind
T. Rempel, F. Brüning, in: ANTEC, 2025.
Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen
C. Held, E. Moritzer, in: FA11 – Kunststoff-Fügen, 2025.
Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen
C. Held, E. Moritzer, in: FA11 – Kunststoff-Fügen, 2025.
Vergleich experimenteller Methoden zur Untersuchung des Aufschmelzprozesses in Einschneckenextrudern
F. Knaup, F. Brüning, Extrusion (2025) 28–33.
Thermo-Chemical Devulcanization of Sulfur-Cured Styrene-Butadiene Rubber (SBR) Using Diphenyldisulfide (DPDS)
J.D.R.H. Petzke, V. Schöppner, in: 2025.
Influence of Filler Type and Volume Fraction on the Electrical Conductivity and Shore Hardness of TPU Composites in Fused Filament Fabrication
E. Moritzer, M.K.F. Salm, in: The 40th International Conference of Polymer Processing Society, 2025.
Non-destructive fiber-matrix adhesion measurement of glass fiber reinforced thermoplastic composite laminates using ultrasound
E. Moritzer, P. Brandes, M. Wittler, L. Claes, M. Wippermann, B. Henning, in: 40th International Conference of the Polymer Processing Society, 2025.
Experimental Analysis of the Mixing Behavior of Ethylene-Propylene-Diene Rubber (EPDM) in a Rubber Pin Extruder under Variation of Process Parameters and Mixing Elements
J.D.R.H. Petzke, L. Schmidt, D. Kleinschmidt, F. Brüning, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 150–151.
Numerical modeling of the non-isothermal viscoelastic flow behavior of rubber compounds based on the PHAN-THİEN-TANNER (PTT) model
H. Damanik, A. Fatima, S. Turek, J.D.R.H. Petzke, D. Kleinschmidt, F. Brüning, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 266–268.
Thermo-Chemical Devulcanization of Sulfur-cured Styrene-Butadiene Rubber (SBR) Using Diphenyldisulfide (DPDS)
J.D.R.H. Petzke, D. Kleinschmidt, F. Brüning, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 185–186.
Investigations into the specific throughput stability of conical feed zones over the rotation speed during the direct processing of polypropylene regrind
T. Rempel, F. Brüning, ANTEC (2025).
Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken
C.W.T. Schall, Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken, Shaker Verlag, Düren, 2024.
Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur
M. Richters, Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur , 2024.
Untersuchung des Füllverhaltens holzfaserverstärkter Kunststoffe (WPC) mit hohen Füllstoffgehalten
F. Flachmann, Untersuchung des Füllverhaltens holzfaserverstärkter Kunststoffe (WPC) mit hohen Füllstoffgehalten, Shaker Verlag, Düren, 2024.
Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion
M. Frank, Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion, Shaker Verlag, 2024.
Herstellung und Charakterisierung von Wood-Plastic-Composites (WPC) mit einer Matrix aus thermoplastischen Polyurethanen zur Erzeugung einer Holz-WPC-Verbundstruktur
M. Richters, Herstellung Und Charakterisierung von Wood-Plastic-Composites (WPC) Mit Einer Matrix Aus Thermoplastischen Polyurethanen Zur Erzeugung Einer Holz-WPC-Verbundstruktur , 2024.
Ein Beitrag zur Erarbeitung von Fertigungsrichtlinien für das Kunststoff Freiformen
A. Hirsch, Ein Beitrag Zur Erarbeitung von Fertigungsrichtlinien Für Das Kunststoff Freiformen , 2024.
Materialschonende Verarbeitung von Thermoplasten auf Wave-Schnecken
C.W.T. Schall, Materialschonende Verarbeitung von Thermoplasten Auf Wave-Schnecken, 2024.
Experimentelle und simulative Analyse der Mischwirkung in Einschneckenextrudern
M. Schadomsky, Experimentelle Und Simulative Analyse Der Mischwirkung in Einschneckenextrudern, 2024.
Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process
E. Moritzer, C.L. Elsner, in: 2024.
Ein Beitrag zur Steuerung der Faserstaubentwicklung faserverstärkter Kunststoffe beim mechanischen Recycling
L. Tölle, Ein Beitrag zur Steuerung der Faserstaubentwicklung faserverstärkter Kunststoffe beim mechanischen Recycling , Shaker Verlag, 2024.
Praxisrelevante Aspekte des Stempelnietens für Organoblech-Metall-Hybridverbindungen
E. Moritzer, P.L. Völklein, in: DVS Sitzung FA11 - Kunststofffügen, DVS, Lippstadt, 2024.
Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen
E. Moritzer, C. Held, in: DVS Sitzung FA11 - Kunststofffügen, Chemnitz, 2024.
Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen
V. Schöppner, T. Arndt, in: DVS Plenarsitzung AG W4 Fügen von Kunststoffen, DVS, Würzburg, 2024.
Anbossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen
V. Schöppner, T. Arndt, in: DVS Sitzung FA11 - Kunststofffügen, DVS, Lippstadt, 2024.
Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen
V. Schöppner, T. Arndt, in: DVS Sitzung FA11 - Kunststofffügen, DVS, Chemnitz, 2024.
Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen
E. Moritzer, C. Held, in: DVS Sitzung FA11 - Kunststofffügen, DVS, Lippstadt, 2024.
Influence of the screw dome geometry on the mechanical strength of direct screw fastened SMC/BMC components
E. Moritzer, C. Held, in: 77th Annual Assembly of the International Institute of Welding, Rhodos, 2024.
Inline Plasmavorbehandlung im Mehrkomponentenspritzgießen - InMould-Plasma
E. Moritzer, D. Rauen, in: VDI-Jahrestagung Spritzgießen, Wiesbaden, 2024.
Wie der Füllstoffvolumenanteil die Materialeigenschaften beeinflusst
E. Moritzer, C.L. Elsner, M.K.F. Salm, Plastverarbeiter 2024 (2024).
Investigation of the weld seam quality of particle filled polymers in the fused filament fabrication process
E. Moritzer, J. Beutelspacher, C.L. Elsner, Polymer Composites (2024).
Reversibles Heißluftnieten – neuartiges Konzept für kreislauffähige Werkstoffverbunde
E. Moritzer, C. Held, M. Albrecht, A. Seefried, Joining Plastics (2024) 74–77.
Kreislaufwirtschaft, Industrie 4.0? - KI gestützte Prozessregelungen zeigen Potential
E. Moritzer, F. Brüning, S. Hopf, P. Lettmann, Kunststoffland NRW Report (2024).
Large-Area, Complex Parts? The Solution Is InMould-Plasma
E. Moritzer, D. Rauen, F.M. Mühlhoff, H. Schlee, B. Kolbe, C. Hokamp, Plastics Insights Volume 114 (2024) 34–37.
Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking
J.P. Oldemeier, V. Schöppner, Polymers 16 (2024).
Development of scale-up rules for the quasi-simultaneous laser transmission welding (LTW) of thermoplastics
V. Schöppner, T. Arndt, in: A.-C. Proceedings (Ed.), The 2nd International Symposium on Plastics Technology, {AIP Publishing}, 2024.
Method Development for the Prediction of Melt Quality in the Extrusion Process
V. Schöppner, D. Trienens, T. Bäck, S. Tsi-Nda Lontsi, P. Krause, F. Budde, Polymers 16 (2024) 1197.
Load Differences between the Screws in the Solids Conveying Zone of Co-Rotating Twin-Screw Extruders
L. Austermeier, V. Schöppner, 37th International Conference of the Polymer Processing Society (2024).
Influences of the convective heating on the material damage to plastics during hot gas series welding
K. Gevers, V. Schöppner, A. Seefried, M. Gehde, M. Albrecht, Joining Plastics 18 (2024) 108.
Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6
K. Gevers, V. Schöppner, L. Schraa, P. Toews, J. Decker, K. Uhlig, M. Stommel, Welding in the World (2024).
Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6
J. Decker, L. Schraa, M. Stommel, K. Gevers, V. Schöppner, P. Töws, K. Uhlig, Welding in the World (2024).
Modifikation von Pyrolyseruß mittels Plasmaaktivierung
V. Schöppner, D. Kleinschmidt, in: AZuR-Kolloquium, Jülich, 2024.
The Potential of DEM Simulation for the Prediction of Torque Differences in the Melting Zone of Co-rotating Twin-Screw Extruders
L. Austermeier, V. Schöppner, Book of Abstracts of the 5th Aspherix(R) & CFDEM(R) Conference (2024).
Material and process effects on the tribological behavior of polymer bulk materials
F. Brüning, J. Landgräber, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), 2024.
Investigation of alternative screw concepts for rubber extrusion
F. Brüning, L. Schmidt, in: D. Institut für Kautschuktechnologie e.V. (Ed.), 20. Kautschuk-Herbstkolloquium (KHK), 2024.
Einfluss der konvektiven Erwärmung auf die Materialschädigung von Kunststoffen beim Warmgasserienschweißen
K. Gevers, V. Schöppner, M. Albrecht, M. Gehde, A. Seefried, Joining Plastics (2024) 108–114.
Influence of pre-shearing on the rheological properties of filled rubber compounds
F. Brüning, D. Kleinschmidt, in: 15. Kautschuk Herbst Kolloquium, 2024.
Investigation of alternative pinless screw concepts for rubber extrusion
L. Schmidt, F. Brüning, in: Deutsche Kautschuk Tagung 2024 (DKT 2024), 2024.
A Cost-effective Determination of Pressure - and Temperature-Dependent Viscosity of Polymers by Linking Conventional Viscosity Data to PVT Data
F.P. Hanselle, D. Kleinschmidt, F. Brüning, The Nordic Rheology Society VOL. 32 (2024) 129–140.
Improvement of an alternative method for the correction of wall slip effects in rheological studies of filled rubber compounds
F. Brüning, D. Kleinschmidt, J.D.R.H. Petzke, in: 39th International Conference of the Polymer Processing Society, 2024.
Simulative Approach for Predicting the Heating Behavior of Elastomers in the Solid-State Microwave Heating Process
J.D.R.H. Petzke, F. Brüning, D. Kleinschmidt, in: 39th International Conference of the Polymer Processing Society, 2024.
SIMULATION OF MICROWAVE HEATING IN THE VULCANIZATION PROCESS OF RUBBER EXTRUDATES
J.D.R.H. Petzke, F. Brüning, D. Kleinschmidt, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), 2024.
Applicability of empirical rheological transfer functions on filled rubber compounds
F. Brüning, D. Kleinschmidt, J.D.R.H. Petzke, in: Deutsche Kautschuk Tagung 2024 (DKT 2024), 2024.
Improvement in an Analytical Approach for Modeling the Melting Process in Single-Screw Extruders
V. Schöppner, F. Brüning, F. Knaup, Polymers 16 (2024) 3130.
Serial hot gas welding - Heating and welding behaviour of a slot nozzle
M. Albrecht, M.O. Bialaschik, M. Gehde, V. Schöppner, in: AIP Conference Proceedings, AIP Publishing, 2024.
Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access
V. Schöppner, T. Arndt, in: 77th Annual Assembly of the International Institute of Welding (IIW) (Ed.), 2024.
Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme
E. Moritzer, F. Bartmann, A. Riedl, eds., Entwicklung Einer Analytischen Berechnungsmethode Zur Auslegung Thermoplastischer Flanschsysteme, VDI Verlag, 2024.
Show all publications