Veröffentlichungen: 2013

E. MORITZER; C. LEISTER; K. SCHARR: A Look Beneath the Surface. In: Kunststoffe international, Heft 10, 2013, S. 160-162, ISSN: 1862-4243.

E. MORITZER; J. KRUGMANN: Angespritzes, dichtendes, mechanisches Fuegeelement: Verbinden mittels selbstverformender Verschraubung. 3. Fuegetechnisches Gemeinschaftskolloquium 2013, Rostock, 2013, ISBN: 978-3-86776-415-5.

E. MORITZER; C. LEISTER; K. SCHARR: Blick unter die Oberflaeche. In: Kunststoffe, Heft 10, 2013, S. 242-245

V. SCHÖPPNER; S. LITTEK: Comparison between the calculated and measured molecular weight loss in single screw extrusion. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

V. SCHÖPPNER; A. WIBBEKE: Comparison of Stretched Polycarbonate Films Produced on a Stretching Line and a Stretching Frame. In: Polymer Engineering and Science, 2013

V. SCHÖPPNER; F. EVERS; M. LEXOW: Das Verhalten flammgeschützter Materialien im Kunststoffschweißprozess. In: Joining Plastics, 7. Jg. Heft 3-4, 2013, S. 182 - 189, ISSN: 1864-3450.

E. MORITZER; C. LEISTER: Effects of a locally inhomogeneous atmospheric pressure plasma treatment on the adhesive bond strength.71st Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Cincinnati (USA), 2013

V. SCHÖPPNER; A. WIBBEKE; R. MAHNKEN: Experimental investigations on the induced anisotropy of mechanical properties in polycarbonate films. In: ISRN Materials Science, 2013

E. MORITZER; S. SEIDEL; T. PLUGGE: Experimental Verification Of Process-Parameter-Dependent Temperature Simulation Of The Two-Stage GITBlow-Process. 71st Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Cincinnati (USA), 2013

V. SCHÖPPNER; A. WIBBEKE: Fabrication of Self-Reinforced Polycarbonate Films. In: SPE Plastics Research Online, 2013

V. SCHÖPPNER; A. WIBBEKE: Graded Structured in Amorphous Polymers: Fabrication of Self-Reinforced Polycarbonate. In:Functionally Graded Materials in Industrial Mass Production - Volume 2. Auerbach: Wissenschaftliche Skripten, 2013, S. 129-144, ISBN: 978-3-942267-91-5.

V. SCHÖPPNER; A. WIBBEKE; H.-P. HEIM; A. RIES; B. ROHDE: Graded Structured in Polymers. In: Functionally Graded Materials in Industrial Mass Production - Fundamentals. Auerbach: Wissenschaftliche Skripten, 2013, S. 11-42, ISBN: 978-3-942267-92-2.

V. SCHÖPPNER; A. WIBBEKE: Graded Structured in Films. 6. Forum Metallplastizitaet / Funktional gradierte Strukturen, Paderborn, 2013

E. MORITZER; S. SEIDEL: GRIPBlow - Gasinjektionstechnik für Hybridbauteile. In: Ingenieurwissenschaften Jahresmagazin, 2013, S. 52-55

V. SCHÖPPNER; A. WIBBEKE: Homogenization of film thickness in the stretching of polycarbonate. 71st Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Cincinnati (USA), 2013

E. MORITZER; M. HOPP; R. KLEESCHULTE: Improving bond strength of hard-soft combinations by dynamic mold heating. In: TPE Magazine international, Heft 3, 2013, S. 176-183

V. SCHÖPPNER; A. WIBBEKE: Influence of Annealing on the Polycarbonate Stretching Process. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

V. SCHÖPPNER; A. BAGSIK; E. KLEMP: Mechanical Analysis of Lightweight Constructions Manufactured with Fused Deposition Modeling. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

E. MORITZER; J. KRUGMANN: Mechanical fastening solution with a sealing undercut which ensures a uniform force transmission. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013, S. 17-80

V. SCHÖPPNER; T. HERKEN; P. KLOKE; J. RUDLOFF; K. KRETSCHMER; P. HEIDEMEYER; M. BASTIAN; A. WALTHER; A. DRIDGER: Modeling of the Glass Fiber Length and the Glass Fiber Length Distribution in the Compounding of Short Glass Fiber-Reinforced Thermoplastics. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

V. SCHÖPPNER; T. HERKEN; P. KLOKE; J. RUDLOFF; K. KRETSCHMER; P. HEIDEMEYER; M. BASTIAN: Modeling of the Glass Fiber Length Distribution in the Compounding of Short Glass Fiber-Reinforced Thermoplastics. 71st Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Cincinnati (USA), 2013

E. MORITZER; J. KRUGMANN: Neue Methode in der Kunststofffuegetechnik. In: Joining Plastics, 2013, S. 85-90

V. SCHÖPPNER; A. WIBBEKE; D. BIERMANN; S. HESS; A. RIES; T. WAGNER: Optimization of thermomechanical processes for the functional gradation of polymers by means of advanced empirical model technique. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

V. SCHÖPPNER; H. HÖRMANN: Optimizing High-Speed-Screws for Applications requiring high Melt Temperatures. 14th TAPPI European PLACE Conference, Dresden, 2013

V. SCHÖPPNER; H. HÖRMANN: Optimizing High-Speed-Screws for Applications requiring high Melt Temperatures. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

E. MORITZER; J. KRUGMANN: Schraubblindniet - Verbinden durch selbst verformende Verschraubung. DVS Congress, Essen, DVS Media GmbH, 2013, S. 194-198

V. SCHÖPPNER; F. EVERS: Schweißen flammgeschützter Kunststoffe. 23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Technomer), Chemnitz (Deutschland), 2013

V. SCHÖPPNER; M. FISCHER: Some Investigations Regarding the Surface Treatment of Ultem*9085 Parts Manufactured with Fused Deposition Modeling. 24th Annual International Solid Freeform Fabrication Symposium ? An Additive Manufacturing Conference SFF, Austin (USA), 2013, S. 629-640

E. MORITZER; C. LEISTER: Surface pretreatment of plastics with an atmospheric pressure plasma jet - influence of generator power and kinematics. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

C. LAKEMEYER; V. SCHÖPPNER: Temperature calculation for extruder screws with internal heat pipes. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg (Deutschland), 2013, ISBN: 978-0-7354-1227-9.

E. MORITZER; C. BUDDE; C. LEISTER: The aging process of atmospheric-pressure plasma treated thermoplastics - influence on mechanical properties. 66th Annual Assembly of the International Institute of Welding (IIW), Essen, 2013

V. SCHÖPPNER; F. EVERS: The behaviour of flame retardant material in the plastic welding process. 27th Annual Assembly of the International Institute of Welding (IIW), Essen (Deutschland), 2013

E. MORITZER; E. MÜLLER; R. KLEESCHULTE: The influence of different screw concepts while processing fibre reinforced thermoplastics with the concept of inline-compounding on an injection moulding machine. 29th International Conference of the Polymer Processing Society (PPS), Nürnberg, 2013

E. MORITZER; C. BUDDE; F. BAUSE: Utilizing ultrasound material parameter determination for the characterization of different stages of ageing in Polyamide 6. 6th Dresden Airport Seminar, 2013